First Draft of Solid Models

Draft of acrylic cube solid model, made so that our circuit board snaps in place as the bottom of the cube.  Following this model is a front view of the acrylic cube with the LEDs laid out in the proper shape.  For the LEDS, files for red and yellow LED drawings were found on GrabCad and used.

The following solid models were created for the servo-motion-mechanism. A solid model of a servo was downloaded from  GrabCad . The following are images of a bracket that will hold a servo motor, and the corresponding platform that will hold either another servo or the LED cube.

This is a link to a google drive folder with the solid models.

Google Drive

This is a video of the assembly in motion. There were technical difficulties getting the second motor to produce motion of the top bracket. Solidworks outputted an error message of " Simulation cannot continue" We hope to have this problem solved soon and have a proper assembly motion analysis done.

These are very rough solid models and will need to be furthur refined.